China KP1011ALFSG HYDRAULIC GEAR PUMP | Partsdic®

China KP1011ALFSG HYDRAULIC GEAR PUMP | Partsdic®

KP1011ALFSG HYDRAULIC GEAR PUMP | Partsdic®
The KP1011ALFSG pump is known for its efficiency, which is a critical aspect of hydraulic systems. Efficient pumps help minimize energy consumption and reduce heat generation. This efficiency is achieved through precise manufacturing tolerances and the use of high-quality materials.
KP1011ALFSG, HYDRAULIC GEAR PUMP | Partsdic®

The KP1011ALFSG is a positive displacement hydraulic gear pump, characterized by its ability to deliver a consistent flow of hydraulic fluid regardless of pressure.


Its performance is essential for powering hydraulic cylinders, motors, and other hydraulic actuators. This pump's design is built around the fundamental principle of meshing gears within a housing to create a pumping action.

Key specifications of the KP1011ALFSG hydraulic gear pump include its flow rate, pressure rating, and size. Flow rates typically range from a few gallons per minute (GPM) to much higher capacities, depending on the specific model and application requirements. The pressure rating is an important parameter, indicating the maximum pressure the pump can handle safely. Common pressure ratings for these pumps fall within the range of 2,000 to 3,500 pounds per square inch (psi). The physical dimensions, such as the pump's length, width, and height, vary depending on the model, ensuring compatibility with various equipment configurations.

The KP1011ALFSG pump consists of two essential components: a housing and a pair of meshing gears. The housing encloses the gears and creates sealed chambers within the pump. As the gears rotate, they trap hydraulic fluid in these chambers and force it to move from the inlet side to the outlet side. This displacement of fluid generates hydraulic pressure, which is then transmitted to the connected hydraulic circuit.

One notable feature of hydraulic gear pumps is their ability to provide relatively high flow rates at lower pressures. This makes them well-suited for applications that require rapid fluid transfer, such as lifting heavy loads or moving materials. Additionally, the simplicity of their design contributes to their reliability and ease of maintenance.

The KP1011ALFSG pump is known for its efficiency, which is a critical aspect of hydraulic systems.


Efficient pumps help minimize energy consumption and reduce heat generation. This efficiency is achieved through precise manufacturing tolerances and the use of high-quality materials.

In terms of installation, the KP1011ALFSG is typically mounted on the power unit of hydraulic machinery, with the input shaft connected to a power source, such as an electric motor or an internal combustion engine. The output port is connected to the hydraulic circuit, allowing the pump to deliver hydraulic fluid to various hydraulic components.

Proper maintenance is crucial to ensure the long-term performance of the KP1011ALFSG hydraulic gear pump. This includes routine inspections, oil level checks, and replacement of worn or damaged components. Regular fluid changes are also necessary to maintain the pump's efficiency and protect it from contamination.
HYDRAULIC GEAR PUMP | Partsdic® KP1011ALFSG
WhatsApp
wechat
Email
Skype
X
Telegram